Click on the image to check the artwork
- Flow indication (totalize, actual, percent)
- Indication of different volume- and mass flow units
- Second (manual) calibration storing
- Patented float blocking indication function
- Signal output damping
- Error message indication
- Temperature measurement in the electronic transmitter
Yokogawa Pressure Transmitter Specifiction
|
EJA130A High Static Differential Pressure Transmitter |
|||
|
M Capsule |
H Capsule |
||
|
Range |
-100 to 100 kPa |
-500 to 500 kPa |
|
|
Span |
1 to 100 kPa |
5 to 500 kPa |
|
|
Accuracy |
±0.065% |
±0.065% |
|
|
Degrees of protection |
IP67, NEMA 4X, and JIS C0920 immersion proof |
||
|
Certificates |
FM, CENELEC ATEX, CSA, IECEx |
||
|
Output |
4 to 20 mA DC or FOUNDATION™ fieldbus or PROFIBUS PA 2-wire system with digital communication |
||
|
Supply voltage |
BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) |
||
|
Ambient temperature |
-40 to 85 deg C (-40 to 185 deg F) (general use type) |
||
|
Process temperature |
-40 to 120 deg C (-40 to 248 deg F) (general use type) |
||
|
Maximum working pressure |
32 MPa (4500 psi) |
||
|
Mounting |
2-inch pipe mounting |
||
|
Wetted parts material |
Capsule |
SUS316L (Diaphragm material is Hastelloy C-276) |
|
|
Cover flange |
SUS316 |
||
|
Housing |
Cast aluminum alloy or SUS316 equivalent stainless steel (optional |
||
Email: sales@chinaguiding.com
Website: www.chinaguiding.com/